Applications & Use Cases

4400–5000 MHz 50W RF Power Amplifier: Targeted-Band Integration & NATO Band IV SWaP (MCW4700M47A)

2026-09-25

In tactical data links, unmanned aerial vehicle (UAV) downlinks, and point-to-point microwave systems operating within the 4400 to 5000 MHz allocation (NATO Band IV /...

20–520 MHz 200W RF Power Amplifier: DC Power, Antenna Matching, and Thermal Integration (MCW002052M53A)

2026-09-25

Covering 20 MHz to 520 MHz in a single power amplification block spans tactical VHF communications in the 30–88 MHz range, civilian and military airband,...

700–2700 MHz 100W RF Power Amplifier: Linearity, PAPR & Electrical Integration (MCW0727M50A)

2026-09-24

Covering 700 MHz to 2700 MHz within a single solid-state power amplifier (SSPA) spans frequency ranges used by cellular infrastructure, GNSS-related test systems, and industrial...

1.5–30 MHz 200W HF Power Amplifier Integration: Power Delivery, Harmonics & ATU Interfacing (MCW0001003M53)

2026-09-24

Covering 1.5 MHz to 30 MHz, the amplifier spans the upper Medium Frequency (MF) region and the full High Frequency (HF) band within a single...

1–6 GHz 50W RF Power Amplifier: Power, Thermal & RF Integration Guide (MCW1060M47A)

2026-09-24

Covering 1000 MHz to 6000 MHz, the amplifier spans L-band, S-band, and the lower portion of C-band applications within a single module. Utilizing a single...

Custom Broadband RF Power Amplifier Modules: Ruggedization, Built-In Protection & OEM Integration (1.5 MHz–18 GHz)

2026-09-22

Standard catalog solid-state power amplifier modules serve broad commercial, laboratory, and prototype testing requirements. However, integrating high-power RF stages into constrained airborne pods, unmanned aerial...

Integrating High-Power Broadband RF Amplifier Modules: DC Bus Sizing, Baseplate Heat Sinking & SWaP-C Engineering (1.5 MHz–18 GHz)

2026-09-22

Integrating modular solid-state power amplifiers into compact aerospace pods, vehicle-mounted counter-UAS platforms, or tactical software-defined radio (SDR) payloads presents fundamentally different challenges than installing rack-mount...

19-Inch Rack-Mount SSPA Commissioning: Protection, Thermal Derating & RF Drive Setup

2026-09-21

The commissioning procedure for a rack-mount SSPA focuses on cabinet-level integration rather than component-level assembly. Standard Microwave Amplifier Subsystems package solid-state power stages, power supply...