Wideband Microwave Converter Modules & Coherent Arrays
Engineered for complex millimeter-wave signal conversion, multi-octave spectrum translation, and multi-channel coherent direction-finding from 1 GHz to 40 GHz.
Source Factory
No simulated specs. Swept on Keysight N9030B PXA. Printed curves and .s2p files included.
Phase Mismatch
Multi-channel arrays share a Common LO, physically restricting channel drift to <0.5° over 24h.
1-Unit Custom MOQ
Radar prototypes require testing. We back you with 1-unit custom runs (3-4 wks).
Hardened Packaging
CNC modules secured inside anti-static foam, sealed in 5-layer cartons.
Hardware View
RF Schematic
1-18 GHz Wideband Converter Module
SKU: 0118G-1G-600MHigh-linearity single-channel frequency conversion module. Precision-engineered for multi-octave automated spectrum monitoring and receiver front-ends requiring flat power gain and low intermodulation distortion.
Built for wideband ELINT interception and wide-spectrum conversion. The 10 MHz tuning step ensures zero blind spots across 1–18 GHz. Note the +3 dBm max damage threshold—cascade an external limiter if operating near raw radar transmitters.
- RF Input Frequency
- 1 – 18 GHz
- IF Output Frequency
- 1.0 – 1.2 GHz
- IF Bandwidth
- 500 / 700 MHz
- Number of Channels
- 1 Channel
- Power Gain
- 50 – 60 dB
- Noise Figure
- 20 dB (Max)
- Input 1dB Compression
- -20 dBm
- Tuning Resolution
- 1 – 10 MHz
- Spurious Suppression
- —
- RF Connectors Input/Output
- In: SMA, Female / Out: SMA, Female
Dual-Channel Assembly
Coherent Schematic
1-18 GHz 2-Channel Phase-Synchronous Converter Array
SKU: 0118G-1G-600M-2CHCoherent dual-channel wideband frequency conversion array. Features an ultra-low noise receiver architecture and precision-matched phase tracking, optimized for multi-channel interferometer arrays.
Standalone converter modules drift independently over temperature. This assembly splits a single ultra-stable internal LO to drive both conversion channels coherently. Need a specific 70 MHz or 1.5 GHz IF instead of 1.2 GHz? We re-layout internal conversion filters in 21 days.
- RF Input Frequency
- 1 – 18 GHz
- IF Output Frequency
- 1.0 / 1.2 GHz
- IF Bandwidth
- 500 / 700 MHz
- Number of Channels
- 2 Channels
- Power Gain
- 55 dB
- Noise Figure
- 8 – 10 dB
- Input 1dB Compression
- -20 dBm
- Tuning Resolution
- 1 MHz
- Spurious Suppression
- 50 dBc
- RF Connectors Input/Output
- In: SMA, Female / Out: SMA, Female
18-40 GHz Dual-Channel Ka-Band Converter Module
SKU: 1840G-1G-1G-2CHHigh-frequency millimeter-wave dual-channel converter module. Equipped with an expansive 1000 MHz (1 GHz) instantaneous IF bandwidth, purpose-built for Ka-band satellite communication testbeds and wideband radar simulation.
At 40 GHz, cavity radiation leakage ruins conversion spurious levels. We use integrated CNC internal shielding walls to isolate channels, maintaining rejection at ≥50 dBc. Warning: External finned heatsink is mandatory for 24/7 continuous bench duty.
- RF Input Frequency
- 18 – 40 GHz
- IF Output Frequency
- 1.0 / 1.2 GHz
- IF Bandwidth
- 1000 MHz
- Number of Channels
- 2 Channels
- Power Gain
- 55 dB
- Noise Figure
- 20 – 22 dB
- Input 1dB Compression
- -20 dBm
- Tuning Resolution
- 1 MHz
- Spurious Suppression
- 50 dBc
- RF Connectors Input/Output
- In: 2.92mm, Female / Out: SMA, Female